Operational to link the Bluetooth remote control to the smart lamp

1. The Bluetooth remote control can directly control the products that are configured from the factory with the user name Mesh and password 123.

2. If the name and password of the Bluetooth remote control and the lamp do not match, the user must configure it as follows:

2.1. From the mobile APP, configure a new user name and password, for example :

User : Laes
Password : 123,
Press log in and do not exit the application.

2.2. Press the On/Off button and the CCT button on the remote control at the same time for 5 seconds, the LED starts flashing, and the remote control enters the setting mode.

2.3. In the mobile application, Smartlight screen, tap the "+" sign in the lower right corner. Tap the light icons that are not to be used and they turn gray. Leave the light(s) that are needed in yellow and press "Add all" to finalize the link. Finally press any button on the remote control to exit the setup method and the remote will be linked.

2.4. If you want to change to another user and password, first you have to return to the factory settings and then follow steps 2.1 to 2.3 4.

How to reset the remote control to factory settings

Press and hold the on/off button for 15 seconds. When the light flashes the remote control has restored the factory settings.