Procedure for pairing the Bluetooth remote control with the smart lamp

1. The Bluetooth remote control can directly control products that are factory-configured with the username Mesh and password 123.

2. If the username and password of the Bluetooth remote control and the lamp do not match, the user must configure it as follows:

2.1. From the mobile APP, configure a new username and password, for example:

Username: Laes
Password: 123,
Press log in and do not exit the application.

2.2. Simultaneously press the on/off button and the CCT button on the remote control for 5 seconds; the indicator light will start flashing, and the remote control will enter configuration mode.

2.3. In the mobile application, on the Smartlight screen, press the “+” sign located in the bottom right corner. Press the light icons that will not be used, and they will turn gray. Leave the required light(s) in yellow and press “Add all” to finalize the link. Finally, press any button on the remote control to exit the configuration method, and the remote will be linked.

2.4. If you want to switch to another user and password, you must first revert to factory settings and then follow steps 2.1 to 2.3.

How to restore the remote control to factory settings

Press and hold the on/off button for 15 seconds. When the indicator light flashes, the remote control has been restored to factory settings.